wedgeskate75 – https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-london/

How to Repair a Bad Patio Door LockA secure patio door is a crucial element of home security. It can be difficult when it isn’t easy to lock.A lock that is not working can be caused by misalignment or even wear and tear. Lubricating the lock or adjusting its position may help to restore its function. If these solutions aren’t working, you can replace both the mortise as well as the handle.Clean and LubricateOver time, dirt, dust and grime can make it difficult to open and close the door lock. Regular cleaning and lubrication can help to prevent your security device from becoming stiff or stuck. This will help you save money on repair costs and prolong the lifespan of your door.To begin, you’ll have to clean the lock’s the cylinder. To do this, you’ll need a spray bottle of penetrating oil, like WD-40. Spray a small amount oil into the keyhole and then turn the key to spread it. Avoid using household solvents or other oils which could harm your locks. Also, make sure you spray some on the key itself.When your lock’s cylinder is clean, it’s time to lubricate. why not try this out can use dry lubricants like graphite powder or a silicone spray. Graphite powder lasts for a long time and doesn’t attract dust like liquid lubricants, so it’s an excellent choice for lubricating sticky locks. Silicone sprays are water resistant and can withstand moist and freezing temperatures, but might require multiple coats to work effectively.You can also apply de-icer spray, which is specifically designed for cold weather. It will remove the frost and ice from the mechanism of your lock. This will allow you to unlock your lock and lock it more easily.How often you should oil your locks will be contingent on environmental factors. A location near the coast will expose your door to salty air, which can cause corrosion, and temperature variations can impact how well your lock works. The general rule of thumb is to lubricate your locks at least twice a year, or more frequently if you live in an area that experiences harsh weather conditions. Lubricating your patio door locks will save costs on repairs, and ensure that they continue to function in a good way for many years.Reposition the Lock CylinderIf your patio door lock does not work properly it could be because one or more of its parts could be damaged or misaligned. Regular inspection and timely repair of a faulty patio door lock will prevent additional damage and ensure that your doors are secure. You can repair doors that are locked or unlocked by tightening loose screws, altering the lock mechanism, or replacing the lock cylinder.Begin by inspecting the exterior and interior of the lock for signs of damage or misalignment. The patio door locks may expand or contract depending on the weather, and could shift over time. This slight movement can cause the locking mechanism to misalign and cause problems when opening or closing the door.Then, look over the lock cylinder for obstructions within the keyway hole. A corroded or obstructed lock cylinder might be difficult to open and may cause damage to the latch springs, cam, or the lock pins. If the cylinder is difficult to insert, you might be able to remove any obstructions with a pair of tweezers or a picklock. If the problem persists it may be necessary to take the cylinder out and disassemble it to find the cause of the obstruction.If the lock cylinder is not been secured to the lock body and is loose, it can be loosened by unscrewing the flat screw on the faceplate of the cylinder. This screw will allow you rotate the cylinder, and may even help restore the proper alignment.Look for the small tab that is movable with the key. It’s usually located at the end. This tiny clip, also known as a “release Tab” is what stops the cylinder from sliding into the lock body all the way. A standard key can move this tab back to release the cylinder and allow it to be removed and put back in.If the lock cylinder of yours is stuck, you may be able to restore proper alignment by turning it until the latch bolt connects with the strike plate, and the handle or knob can be pushed in and withdrawn. Once you’ve restored the proper alignment, reassemble the lock and check its functioning. If your patio door lock is still difficult to use, it’s a sign that another component such as the latch or latch spring is damaged or worn out and may require replacement.Make sure you tighten the ScrewsThe locks on patio doors can be damaged by frequent use, extremes of temperature dust and dirt. Unless properly cared for, these delicate parts can get worn out and cause your door to fail to lock properly. Most lock problems are easily repaired with a few easy steps.The first thing you need to do is clean the lock mechanism. Make use of a damp cloth to clean any dust or dirt that might be present. Then, dry the components thoroughly. After cleaning some silicone-based lubricant will help keep the moving parts running smoothly and effectively. Avoid lubricants containing oil bases, however they could draw dust and dirt which could cause problems.Then, if your patio door is equipped with a security foot lock ensure that the foot lock is properly aligned with the strike plate. Most of the time, this will only require you to adjust the screws that hold your foot lock to the frame of the patio door. Unlock the screw with the Robertson screwdriver and gently push it up or down to adjust the foot lock as needed. After the adjustment is completed then tighten the screw.The most frequent issue in the repair of patio door handles is the misalignment of the strike plate and latch. This could be due to normal wear and tear, or it could simply be due to the fact that the latch is positioned higher or lower than it ought to be.Begin by removing the handle, and then locate the screws or bolts that secure it. Make sure you keep track of them as you will need them later when installing the new handle. Next, remove the old spindle, then slide the new one into place on the inside of the door, making sure that it is aligned with the holes in the interior and exterior handles. Once the new spindle is installed, reinstall the interior and exterior handles, making sure that they are properly aligned with the screws or bolts that hold them in place.Close and secure the patio door after you have made any necessary adjustments. If everything is in proper alignment, the door should open and close smoothly without additional force. If you’re having difficulty it could be necessary to move the strike plate or latch or the lock cylinder could be damaged and must be replaced.Replace the latchIf your patio door locks are still not working, it could be time to replace the lock. The replacement of a lock is a moderately easy home improvement task that many homeowners can do themselves. Begin by sliding the patio doors completely out and then removing your existing lock from the inside of the door. Take note of how the current lock is screwed to the door and the door jamb so that you can discern the kind of lock you’ll need to purchase.Before installing the new latch, loosen the screws securing the strike plate (the part of the lock that’s set on the outside edge of the door frame) and adjust it horizontally or vertically to align it with the hole in the jamb in the door. After you’ve repositioned your strike plate, screw it back into its place and tighten the screws.After all components have been moved or adjusted after which you can assemble and secure your patio door in accordance with the instructions given by the manufacturer. After you’re done, test the latch to make sure that it fits and is able to catch the latch’s hasp when the door is closed. If it does, your patio door lock is now working exactly as it should, and is can provide you with the security and privacy you’ve come expect from your home’s doors.Patio doors, like other components of your home, need to be aligned correctly to function effectively. Over time, cold and hot weather, dirt and debris, and other elements can cause frames, hinges, and the locking mechanism to shift. Incorrectly aligned hinges, door frames, and locking mechanisms are similar to trying to put a key in the wrong keyhole. It’s not working. If you follow these steps, you can solve an issue that been thought to be impossible to fix. You should pat yourself on the back for taking on the project and reclaiming the patio door’s closed position! We’re sure you’ll not have any issues opening or closing your patio door. Best of luck! We’re here for you if there are any concerns or questions.