washerplot7 – https://www.repairmywindowsanddoors.co.uk/altrincham-windowrepair/

Door Handle ReplacementIt’s worth replacing door handles if you aren’t happy with the way they appear, or if they’re difficult to use. Installing the new handle on your door is easy if you have patience.The majority of modern door handles come with cover plates that conceal the screws to create a stylish appearance. If the new handle doesn’t have them already attached, you will have to attach them separately.Remove the Old HandleThe door handle isn’t just a decorative feature for your home It’s also an element of security that allows you to lock and unlock the door. However, over time your door handle can lose its grip, feel loose or start to look old and worn out. This is a sign that it’s probably time for a replacement.One of the first indications that your door handle is in need of replacing is when it becomes difficult to operate. This is a serious issue as you will no longer be able to lock or unlock the door, which could put your family and yourself at risk.Another reason to replace the door handle is if it’s damaged or broken. A damaged or broken door handle can be risky, particularly for elderly and children members who might struggle to open it. They may get trapped. Fortunately, it’s fairly easy to fix a broken door handle by simply replacing the old one.Modern door handles are usually standard sizes and should fit any door. If you are not certain if the new door handle you are buying will work, remove the old one and measure its housing holes. This will enable you to purchase the right size door handle.The easiest way to take off your old door handle is to unscrew it from the door. Usually, a screwdriver is used. Some door handles have an enclosure plate that hides the mounting screws. You will need to remove this to get to the screws. After you’ve removed the old handle, make a note of how the spindle is attached to ensure that you can be sure to align it when you install the new one.You can also remove the door handle by uncrewing it from the latch mechanism. You can use a screwdriver to remove the door handle. However, you’ll have to locate the tiny latch, which is located on the edge cut piece. After you have removed the latch, remove the handle from the strike plate, and then the latch from the door edge.Removing the Strike PlateWhen you replace your handle, you’ll also be required to replace the latch plate that holds the hole that the door’s latch is inserted into when it closes. The new handles will have two latch plates: a rectangular and circular plate (see the above diagram which shows the various parts of a door handle). If your current latch plate is a rectangular shape, switch it to a round one so that the latch hooks onto the strike plate in a manner that makes the handle more comfortable to use.The first step is to unscrew the screw that is holding the latch plate that was previously in place. The screws are typically tight and require a lot of force to loosen them. It is helpful to have a second person help with this part if possible.repairmywindowsanddoors should lift itself out of the door once the screws have been removed. If the latch plate is stuck or refuses to move use a small file to scrape the edges. This can sometimes free up the plate.Now you can prepare the new strike plate for installation. Attach the latch plate to the door jamb using the screws that came with the new handles. Don’t over tighten your screws because this could cause damage to the strike plate.If you’re unsure whether the latch plate is in the right position, try closing and opening the door to see whether it locks and closes correctly. If not you’ll need to adjust the strike plate upwards or down, or forward or back, until the door closes and latches correctly.If the door is jiggling or moving, you may need to increase the size of the hole for the latch in the strike plate. This is more prevalent for older doors, but could also be caused by wear and tear hinge mortises that are too shallow or are not sized correctly for the latch, or from a broken or damaged strike plate. If this is the case, follow the same procedure as adjusting the strike plate, but with the use of a metal file instead the hammer and chisel.Removal of the LatchThe latch is the angled piece of metal that moves between the hole that runs along the inside edge of your door. When you turn the handle, it pushes the latch forward, allowing you to open the door. It also connects to a hole in the door frame to keep the door closed. If your door is wiggles when you close it, changing the latch could be all you need to correct the issue.The screws that support the door latch are difficult to locate however, you can insert a screwdriver into a small hole in the trim plate, and then pull the latch off. Once you’ve removed the trim plate, it should be simple to remove the latch and the remaining bolts that hold the spindle and latch in place.If the latch cannot be easily removed then use a paperclip tool to remove it from the handle mechanism. Insert the item into the slot for the latch that is recessed. gently move it around until you feel the latch and handle start to separate. It is possible to repeat this procedure several times before you can take the latch off.After the old latch has been removed it should be possible to slide the new latch into the slot with no issues. Make sure the latch is properly positioned in the slot and aligned with the screw chambers, and then use your new screws to secure it to the strike plate and door frame.Before installing the new handle, make sure to measure your current backset (the distance from the centre of the large hole on the front surface of the door to the edge). Check that the latch size of the new handle matches the measurement.If you’re replacing the latch or handle or handle, or if your previous lock cylinder is damaged, then you’ll require a new one. If you are not changing locks the new lock will fit into the recess you have already installed, and work with your existing keys. Be sure to select an entry point with rectangular cover plates that match your old handles.Removing the Cover PlateDoor handles can start to look worn over time However, if you replace them with a modern lever-on-rose designs, it’s an easy and quick DIY project to decorate and will enhance the overall appearance of your home. You can purchase complete sets of door handles that come with matching escutcheons and privacy adaptor kits.To replace an internal door handle take off the cover plate (or rose) that protects the screws and the inner mechanism. Find an release tab on the plate and use a flathead screwdriver to pop it off the knob. It could have an opening on one edge or be held by a pin.When the cover plate is off, remove the screw that holds the inside handle in place and put it aside. Remove the screws that secure both the outer and inner plates. You can loosen them with a Philips Screwdriver. Take the inner plates and latch from the door. Place them aside.Most doors have a gap between the jamb of the door and the inside edge of the frame that allows for a handle, however not all do. If yours isn’t, you will need to make a hole through the door. It’s the same procedure for opening a locked door, but you will have to be extra cautious not to damage the door or frame.After the holes are drilled, you’ll need to install new screws for the door knob. Purchase the same size as the old screws to ensure that you don’t get the handle too tight or loose. You’ll also need to install a new latch plate and strike rod that aren’t part of the majority of door handle sets.Amazon’s Choice FAERSI 2-piece chrome finish handle sets are a fantastic alternative if you’re in search of a premium interior door handle replacement set. It’s a factory-fit and has received hundreds of five-star reviews from delighted customers. It’s a great choice to replace worn or damaged interior door hardware on your Chevy.