tailorhelium0 – https://www.repairmywindowsanddoors.co.uk/cat-flap-installers-harpenden/

It might seem daunting to put up the flap for your cat however, with the proper instructions it’s not that hard. First, decide how high you would like the flap to be (on average or belly height). Note this on your door, and use the included template as a guide when drilling.If you have a kitten, or a young kitten you can prop the door open very slightly and gradually encourage it to pass through. Reward the kitten as it goes through.Take a measurement of the doorA cat flap is a great option to let your pet come and go in and out of your home as it pleases. This can help keep your cat healthy by ensuring that it is exercising as well as being able to get back in if it is trapped outside in bad weather, particularly in winter. It can also reduce the amount of time you have to let it in or out and can also protect your home by allowing you to be aware of when it went out.However, it is essential that the flap on your cat is fitted correctly to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). You should measure the height of your pet’s stomach and the height of the doorway at your home to make sure the flap is at the proper height. You can adjust the height of your flap when your cat is taller or less than average.Then, use a spirit-level to mark the middle of the door. This is where you will install the flap. With the markings as a guideline, you can use a jigsaw and cut out the shape of the flap in the door. Once you’ve cut the space, sand down the edges of the door to create smooth surfaces. You can then drill any fixing holes needed.Installing a cat flap ought to not take longer than two hours. The process can be slightly more complicated if you are required to install it in the case of a uPVC door or composite one. This is because composite doors are available in different thicknesses, which could affect the way that holes are cut. This is why we recommend calling a professional to carry out the work, particularly in the event that you’ve never worked with glass before.Measure Your CatYou can avoid hours of ignoring the cat’s meows to be let in or out. This is particularly helpful when you’re at working all day and your cat is stuck in the waiting room until you come home regardless of the weather.It is essential to measure your cat’s measurements first before you attempt the installation. Although it might seem like a simple operation it is important to get the measurement right or your cat may find it very difficult to use.First, ensure that your cat is relaxed and not anxious prior to taking the measurements. You’ll need to put your cat in a place where they cannot move. Also, ensure that the measuring tape is flat and not curved against their body. You can take a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.Once you’ve got your cat’s measurements then you can look at the door to determine where to place the flap. A good tip is to position the flap on the highest point of your cat’s stomach as this will help them to get through it without too much effort. This will also prevent the flap from making a lot noise as it swings back and forward.You should consider the thickness of the uPVC or composite door, as well. Although timber doors are of the same thickness, uPVC and composite doors may differ in their overall construction, which can make fitting a cat flap more complicated since you have to make sure the hole you cut is the right size for your pet.You can make use of the template included in the instructions to mark the position of the hole in the door. This will help you to determine the location where the opening should be, and also to ensure that the template is correctly positioned on the door. Using a spirit level to ensure that the template is flush against the door will be extremely helpful.Cut the FlapYou’ll need to make an opening in the door to accommodate your cat flap before you can install it. It’s a challenging task, so it’s recommended that you get a professional help you if you lack the knowledge or skills. You can also refer to the instructions provided with the kit to learn how to do it correctly.To do this, you have to measure the height of your cat’s or kitten’s belly. Use this as an indicator point. In general, place the cat flap approximately 10-15 centimeters above the ground. This is the average height of the belly for cats. cat flap fitting Repair My Windows And Doors will be able to go through the flap with ease and will also make other cats or snooping neighbours difficult time trying to enter or leave.Once you have determined where the cat flap should be located, mark the position on the door with a pencil. If your kit has an outline of paper, place it over the door and use the marks to drill holes in each corner of the template. You will then be able to cut the template’s shape and replace it with your cat flap.You can install the cat flap yourself in an uPVC or wood door if you are confident with the use of a jigsaw. Ensure that you do not cut through any of the door’s mullions or vertical rails. You can use a jigsaw to cut your panel into a square or a circle depending on the way you want it. Make sure to take your time and don’t try to force the jigsaw into cutting faster.After the hole has been cut, carefully fit the flap of cat food into its new location and make sure that it’s securely secured. If it features caps for screws, then put these caps onto the screws that protrude. After the screws are installed then sand the rough edges and then apply sealant to any gaps. This will stop drafts from entering your home.Install the FlapIf you have a simple cat flap, you can leave it open and encourage your pet to go through by placing a small amount of cat food in the front of the door. Alternately, you can push the cat through with your hands or a stick. Once your cat is accustomed to walking through the flap, it should be able to go in and out as it pleases and you should be able to let it out and in without having to be there keeping the door open for it all day (and likely in any weather).It is possible to fit an animal flap inside a UPVC or glass door but it’s not exactly the same as fitting one into a timber exterior door due to the fact that the UPVC doors and some glass doors don’t have the same thickness. This could have an enormous impact on how you cut out the flap’s hole and whether the flap will fit correctly after installation.The mounting kit might include a template that shows you where to drill holes. If the kit does not include a template, you are able to create one yourself. When cutting, it is important to avoid pushing the jigsaw too hard so that you don’t make a larger hole than is necessary in your door.Some cat flaps are available in circular designs, which are more difficult to put in. If you have a round flap, make sure that the hole is in the correct spot on your door. If not, your cat may not be able to access it, and might be stuck outside the whole day (or night).Some cat flaps have locks that let you regulate when your cat can enter and leave. They can be extremely useful if you’re concerned about your cat going out at night and then coming back in due to the darkness, or you’re working all day. The lock can be engaged to allow entry or exit, and some locks can be locked in either direction which allows you to close the door completely. This is particularly beneficial for cats with a chronic illness or older age who aren’t keen on going out in rainy weather.