stockcross8 – https://www.repairmywindowsanddoors.co.uk/dulwich-windowrepair/

Replacing uPVC Window HandlesIt is simple to change the handles on windows made of Upvc. It is important to ensure that the replacement handle fits into the spindle cutout of the window mechanism.If upvc door handle are followed If you follow the steps correctly, any cockspur handle can be able to fit into most windows. The step height of the handle is key.What to look forOver time, uPVC handles on many windows in the UK begin to show signs of wear and tear. When this occurs, the window handle may become loose or difficult to operate, which makes it necessary to replace it. This is a fairly simple job that is achievable by anyone who is comfortable using basic hand tools.The first thing to do is make sure the handle is securely attached to the window frame and in a position that is open. The next step is to locate the screws or pins which hold the handle. These are typically located on the inside face of the handle and are removed using a screwdriver or pliers.Once the handle is loose and sagging, it can be removed from its hinges by gently pulling off. It is then necessary to find a replacement handle with the same design and size. This can be done in an online store or in a DIY store. The process should take about five minutes and requires a screwdriver is all you need.One crucial aspect to take into consideration when replacing a uPVC window handle is its step height. This is the distance between the handle’s base and where it sits in the window frame. This is typically a standard measurement, and it is essential that you examine the step height of your current handle before purchasing the new one.Depending on the kind of handle you choose there are various sizes that are available. Inline handles are available for uPVC windows with lug centres of 31mm, while cockspur handles come with lug centres of 43mm. Tilt and turn handles are commonly found on windows made of uPVC and they come with a unique design that allows windows to be tilted for ventilation and turned to open the window completely.The most frequent breakage in uPVC handles is that they crack inside rather than breaking off from the base section. This can make them hard to open, and it is therefore important to make sure that any replacement handle you purchase has the same spindle length as the one you have.Remove the handle that was previously usedIf your window handles are damaged or not properly fitted, they can cause double-glazed windows to open and close incorrectly. They may even become stuck. There are a variety of reasons for this, such as general wear and tear or corrosion of the handle. In these situations, it is vital to replace the upvc window handle as promptly as you can to prevent further damage or loss of functionality.One of the first steps that you should do when replacing the handles on your windows made of upvc is to remove the old handle from the window. To do this, start by removing the screw that is encased when the handle is in the closed position. This should reveal another screw, and once it is removed, you can then begin to remove the handle itself. It is a good idea to employ an electric screwdriver to accomplish this since it will make the job easier and faster.You should also be aware that screws could be hidden in caps made of plastic. It is recommended to remove the covers using a Stanley knife. After you have removed the old handle, you will have to examine the square cutout on the base to ensure that the new handle you choose for the window lock is compatible. It is important to measure the length of the spindle on the old handle and compare it to the dimensions of the window mechanism spindle cutout.The various types of window handles made of upvc are: Espag handles, which have a central screw and will turn left or right; Cranked handles with two screws, and are found on tilt and turn windows made of upvc; and Spade handles, that have a flat arm and can be used on either side of the window. Once you have a suitable replacement, it is simply a case of screwing the handle into position and making sure that the spindle is correctly fitted into the lock mechanism. After that, you can, tighten the handle to the window frame. The replacement upvc handle should now be secured.Measure the SpindleIf you have to replace a Upvc handle that has fallen, it’s likely that the spindle that holds it in place is damaged or is loose. In some cases this can be fixed with screws or pins to secure it. In other situations, it will require replacement completely. There are many types of upvc window handles. There are three types of handles: inline espagnolette, cockspur, and tilt-and-turn. Each handle type has its own method of installing and removing the handle.Before buying a replacement handle it is important to know the size of the handle that is currently in use. This will ensure that the handle will fit the window properly and will be the right size. Luckily, all handles conform to industry standards for sizing, so it’s quite easy to locate the correct size.To determine the size of the handle move the window to the open position. You should be able to determine the dimensions of the screw or pin that holds the handle. Use a ruler or tape measure to determine the length the spindle is. Once you know the length of the spindle you can purchase a new one with the same length.The step height of a upvc window handle is also important to consider when buying a replacement. The step height is the distance from the base of the handle to the point at which it is placed on the frame. It is typically about 21mm or 9mm for aluminium and uPVC. Dropping something in the space will allow you to observe how far the handle extends before it reaches an obstruction.Cockspur handles may have different backsets, based on the style of window you install them in. Inline Espag handle heights are 43mm from the centre to the centre (two fixing points). Cockspur handles however, have different backset heights dependent on the shape of the window they are in. This is because they feature an extension spur that extends from the handle and is secured over a cockspur wedge striker.Fit the New HandleWhen you’ve chosen a new handle, carefully align it to the screw holes in the door and secure it with the supplied screws. If you’re also replacing the latch lever, it can be installed in a similar way to the main door handle. Finally, reattach the door trim in order to conceal the mounting screws and finish the job.Tip: To remove a metal head from a wedge made of wood, place the handle on the floor so that its wide end is on the ground. Then use to tap the narrow end. Be careful not to damage the handle or the handle spindle.