starhouse9 – https://www.repairmywindowsanddoors.co.uk/weybridge-windowrepair/

How to Replace Door HandlesDoor handles are a key part of the decor of your home. A new handle will elevate your space and bring your decor up to date.Over time, your knobs for your doors can begin to feel stiff or even break. These are indicators that it’s time to change them. This guide will help you select the appropriate replacement door handle for your home.Door KnobsDoor handles add to the aesthetics of your home, while making it easier for people to open and shut doors. They come in a variety of finishes, colors, and styles to match your decor. If yours are starting to begin to show signs of wear or just need an upgrade, replacing them is relatively simple and can be done in a couple of steps.You’ll need to find the shaft, or spindle, through which the knob is attached to the door. Some knobs have a tiny opening that can be used with an screwdriver to take out the set screws that keep the handle in place. Some have a thin slot or hole that allows you to press an activated detent pin that is spring-activated using flathead. This pin releases the latch mechanism, and lets you to pull or push the knob.After you have ahold of the shaft or spindle remove the old door knob and replace it with the new one. Check that the latch is working properly before tightening new set screws.After replacing the knob, put the rod for the latch into the door’s hole. Lock it in place using the rod system on the second knob. Make sure the holes are aligned, then tighten the latch plate screws.Some homeowners opt for a brushed or smooth metal finish for their door hardware to give their home a sleek and contemporary style. This will match their other furniture. Others prefer a more rustic style that is a good match for spaces that are reminiscent of farmhouse. If you have family members who are unable to move You may be interested in a rim lock or lever style door knob, which require less pressure to operate.While aesthetics are traditionally the main consideration when it comes to door handle design, other aspects are increasingly being considered too. Infection control and accessibility have been major considerations in the creation of new handle designs. For example certain handles handle designs can be operated by a person’s arm.LatchThe latch that holds the door handle open will wear down as time passes. Switching out the old latch to fit the new handle is a simple DIY job and it will make a huge change in the way your door opens and closes.Depending on the type of handle you use the latch may be a separate component or an integral part of the knob. In www.repairmywindowsanddoors.co.uk , the same procedure for removing and reinstalling is applicable. It’s simple to take off the old latch, especially if you have a door handle with a “magic” button. The button is located on the left side of the knob, this little pressure-slot is what you need to press to pop the latch out of the handle and out of the latching mechanism.If your handle isn’t equipped with this button, the first step is to take off any cover plates that are positioned over the latch plate. They are typically circular or rectangular and can be removed using a screwdriver to pull them off the handle. Some have a small hole in them that you can put your screwdriver through, while others simply snap off.Next, you will want to remove the two machine screws that secure the latch and the inner plate to the door handle. You’ll need to keep these screws with sharp tips in a safe place to be able to reuse them in the future. After the screws are removed, you can take the latch plate as well as the mechanism from the hole, and then set it aside.Now you can start on the new latch. Install the inside plate of the latch into the hole in the door and secure it with the provided hardware. Make sure that the square pin in the interior of the latch faces the latching mechanism in the handle and is aligned with the screw holes on the other sides of the handle. Then fix the exterior latch plate with the provided screws.Strike PlateOne of the most frequent reasons to replace the door handle is that it is loose or isn’t locking properly. This is typically caused by incorrectly aligned parts of the latching system, for example a strike plate that is too short or has moved upwards or down on the doorjamb as time passes. This simple fix allows you to replace your existing strike plate with a longer, new one that can provide greater security and keep your door closed.Apply a lipstick or other marking material on the bolt for the latch to check if it is the strike plate. Close the door, then try to latch it. If the mark is below your strike plate hole, it indicates that the plate is too small and the door will not latch. If the mark is above or below the strikeplate hole the strikeplate is likely to have been moved upwards or downwards on the doorjamb.Depending on the door, you may be able to simply screw the new strike plate into the door over the old one, using the screws included with it. You may need to drill holes first, and then chisel the wood to ensure a secure fit. If this is the situation, be careful to not be too rough with the chiseling process or you’ll damage the integrity of the doorjamb.You can also try installing a new strike plate which gives the lock a much stronger hold on the door and requires more force to open it. Typically it will require two longer screws that anchor the strike plate to the frame of the door. You’ll need to remove the old strike plate, then drill and chisel the wood to create space for the new one.This difficult-to-find strike plate is made of solid brass and comes with a heavy-duty thickness. It’s designed to be used on antique rim locks. It comes with both wood screws and machine screws, which means you’ll have the right hardware for the job. Just remember that the wood screws have a pointy edge, whereas the machine ones are more blunt.