quincepound6 – https://www.repairmywindowsanddoors.co.uk/billericay-windowrepair/

Door Handle ReplacementIt’s worth it to replace door handles if you aren’t happy with the way they look, or if they’re difficult to use. Installing the new handle on your door is simple if you’ve got patience.Most modern door handles have cover plates that hide the screws to give them a beautiful appearance. However, you will need to attach them separately if your new handle doesn’t already have them.Removal of the old HandleDoor handles are not only an important aesthetic addition to your home, but they’re also crucial for safety as they allow you to lock and unlock your door. As time passes, the door handle may start to lose its grip or feel a bit loose. It could be beginning to appear old and worn. upvc door handles Repair My Windows And Doors is a sign that it’s probably time for a replacement.If your door handle is becoming difficult to use, it might be time to replace it. This is a serious issue since you won’t be able to lock or unlock the door and put you and your family at risk.Another reason to replace the door handle is if it’s damaged or broken. A damaged or broken door handle can be risky, particularly for elderly or children members who struggle to open it. They could become trapped. It’s simple to replace a damaged handle on the door.Modern door handles are typically standard sizes and will fit any door. If you aren’t certain that the new door handle you are buying will work, remove the old one and measure the holes in its housing. This will let you buy the right size door handle.It is easiest to remove the door handle by unscrewing it from the door. This is usually done using a screw driver. However, some door handles have the cover plate which hides the mounting screws so you’ll have to cut off this cover plate to get access to the screws beneath. After you have removed the old handle, take note of the way the spindle is attached. This will aid in aligning the new handle.Alternatively, you can remove the door handle by removing it from the latch mechanism. You can use a screwdriver to remove the door handle. But, you’ll need to locate the small latch, which is located on the edge trim piece. After removing the latch, unscrew the handle and strike plate. Then remove the latch from the door’s edge.Removal of the Strike PlateYou’ll need to replace the latch plate when you replace the handle. It’s the part that holds the hole where the door’s latch hooks in when the door is closed. The package the new handles are packaged in will include two latch plates – one that is rectangular and the other a circular one (see the above diagram that outlines door handle parts). If you have an old rectangular latch plate, swap it with a circular one. This will allow the latch to hook onto the strike plate and make the handle easier.The first step is to unscrew the screw that is holding the old latch plate in place. The screws can be very tight, and may require some force to loosen. It might be beneficial to get a second person to assist in this area if it is possible.The latch plate should lift itself out of the door once the screws have been removed. If the latch plate is stuck or won’t move use a small file to scrape the edges. This will sometimes free the plate.Now, you can proceed to making the new door strike plate to be installed. Attach the latch plate to the doorjamb using the wood screws that came with your new handles. Be careful not to tighten too much the screws, as this may cause damage to the strike plate.If you’re unsure whether the latch plate is in the proper position Try closing and then opening the door to determine if it closes and latches correctly. If it does not then you’ll need to adjust the strikeplate either up or down, forward or back until the door locks correctly.If the door is still moving or jiggling, then you may need to increase the size of the hole for latching in the strike plate. This is more common with older doors, but can happen due to wear and tear, hinge mortises that are too narrow or not the right size for the latch, or from damage or a broken strike plate that is damaged or broken. If this is the situation, follow the same procedure to adjust the strike plate, but with a metal file instead of an hammer and chisel.Eliminating the LatchThe latch is a curved metal piece that slides into and out of a hole on the inside of your door. The latch is moved forward when you turn the handle. It also connects to a hole in the door frame to keep the door shut. If your door wobbles when you close, replacing the latch could be all that is needed to fix the issue.It’s difficult to see the screws that hold the latch to the door, but there’s usually a small slot on the trim plate that permits you to insert a screwdriver and remove it. Once you’ve removed the trim plate, it’ll be simple to remove the latch and the remaining bolts that hold the spindle and latch in place.If the latch won’t come out you can try using an old-fashioned paper clip or tool to spring it loose from the handle mechanism. Insert the item into the recessed slot of the latch and then gently twist or jiggle until the that the latch and handle begin to separate. You may have to do this several times before the latch becomes loose enough to allow it to be pulled out.You should be able to slide the new latch into its slot without issues after you’ve removed the old one. Use the new screws to connect the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot and aligned with the screw chambers.Check the backset of the current handle (the distance between the centre of the large hole in the door’s front and the edge) before installing the new handle. Also, ensure whether the size of the latch on the new handle is a good match to the measurement of your existing handle.If you are replacing the handle or latch or handle, or if your previous lock cylinder is damaged then you’ll require an entirely new one. If you’re not changing the locks, however, a new latch will fit into your existing recess and will work with the keys you have currently. Make sure you select the latch with rectangular cover plates that match your handles.Then remove the Cover PlateDoor handles can start to look shabby with time However, if you replace them with a contemporary lever-on-rose designs, it’s an easy and quick DIY project to decorate and will enhance the overall appearance of your home. You can buy complete sets that include matching escutcheons as well as privacy adaptor kits.To replace the door handle inside, remove the cover plate (or rose), which protects the screws and the inner mechanism. Use a flathead to remove the plate. It may have a slot along one edge or be held in place by pins.Remove the screw that holds the handle in the interior and set it aside once the cover plate is removed. Remove the screws that hold both the inner and outer plates. You can loosen them using a Philips Screwdriver. Take the inner plates and latch from the door. Put them away.Most doors have a gap between the door jamb and the edge of the frame that allows for a handle, but not all do. If yours isn’t have a handle, you’ll need to make a hole into the door. The process for doing this is the same procedure for opening a door with locks, but you’ll be taking extra care not to harm the door or frame.The installation of new door knob screws is required after the holes have been drilled. Be sure to purchase the same size as the old ones, to ensure that you won’t have an handle that is either too tight or loose. You’ll also have to install the new latch plate and strike rod that aren’t part of the majority of door handle sets.If you’re looking for a high-quality replacement set of interior door handles, try the Amazon’s Choice FAERSI two-piece chrome finish handle set. It’s a factory-fit product and has received hundreds five-star reviews. It’s a great choice to replace damaged or worn door handle hardware in the interior of your Chevy HHR.