quartdrink73 – https://www.repairmywindowsanddoors.co.uk/eltham-windowrepair/

Door Handle ReplacementDoor handles may seem like something minor but if you aren’t happy with the way they look or are finding them difficult to use then it’s time to replace them. With a little patience, you can install a new handle in no time.Modern door handles are usually equipped with cover plates that hide the screws, giving them an attractive look. If your new handle does not have them already attached, you will have to attach them separately.Remove the handle that was previously usedThe door handle isn’t only a decoration for your home it also serves as a safety feature that allows you to lock and unlock the door. As time passes, the door handle may start to lose its grip or feel loose. It could also appear old and worn. This is an indication that it’s time for a replacement.One of the first indications that your door handle needs replacing is the fact that it is becoming difficult to operate. This is a problem since it means that you are unable to no longer lock or unlock your door which could create an security risk to you and your family.Another reason to replace the door handle is if it’s damaged or broken. A broken door handle is dangerous, particularly for elderly and children members who might struggle to open it. They could become trapped. It’s simple to fix a damaged handle on doors.Most modern door handles are standard size and so they should fit any door. If you’re unsure if your new door handle will fit, try taking out the old one and measuring the holes in its housing. This will allow you to purchase the right size door handle.It is the easiest method to take off the old door handle by unscrewing it from the door. This is typically done with the screw driver. Some door handles have a cover plate which hides the screws used to mount them. You will need to remove the cover plate to gain access to the screws. Once you’ve removed your old handle, make an outline of how the spindle is attached to ensure that you can align it when you fit your new one.You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver for removing the door handle. However, you will need to locate the small latch, which is located on the edge of the trim piece. Once you’ve removed the latch, you can unscrew the handle from the strike plate, and then the latch from the door edge.Take off the Strike PlateWhen replacing your handle, you’ll also want to replace the latch plate, which is the hole that the door’s latch hooks into when it closes. The packaging that the new handles are packaged with will offer two latch plates: either a rectangular or a circular one (see the diagram above for the parts of the door handle). If your current latch plate is rectangular, swap it out for the circular one so that the latch is able to hook into the strike plate in a way that makes the handle more comfortable to use.The first step is to unscrew the screw that’s holding the latch plate that was previously in place. The screws are typically tight and require a lot of force to loosen them. It may be helpful to have a second person assist in this area if it is possible.The latch plate should be removed from the door after the screws have been removed. If the latch plate is stuck or won’t move, use a small file to scrape the edges. This can help loosen the plate.Now, you can proceed to making the new door strike plate for installation. Using the screws made of wood that came with the new handles, screw the latch plate to the inside of the doorjamb. Be careful not to over-tighten the screws, as this could cause damage to the strike plate.If you’re unsure whether the latch plate is in the proper position, shut and then open the door to check if it latches and closes correctly. If it doesn’t then you’ll have to adjust the strike plate upwards or down, or forward or back until the door closes and latches properly.If the door still moves or jiggles, you may need to increase the size of your latch hole on the strike plate. This is more frequent in older doors, however it could also be caused by wear and tear hinge mortises that are too shallow or the wrong size for the latch, or from damage or a broken strike plate that is damaged or broken. If this is the case, follow the same procedure for adjusting the strike plate, but with a metal file instead of the hammer and chisel.Remove the LatchThe latch is the metal piece that is angled that moves between the hole on the inside edge of your door. The latch moves forward when you turn the handle. It also catches an opening in the door frame to ensure that the door remains closed. If your door wobbles when you close, a new latch may be all that is needed to correct the issue.The screws that hold the door latch are hard to spot however, you can insert a screwdriver into an insignificant hole on the trim plate and pry the latch off. After removal of the trim plate you will be able to pull off the latch and the bolts that hold it in place and the spindle that holds it.If the latch doesn’t easily come out it is suggested to use an old-fashioned paper clip or tool to free it from the handle mechanism. Insert the item in the recessed slot of the latch, and gently twist it or jiggle until you feel that the latch and handle begin to separate. You may have to do this several times before the latch comes loose enough to pull out.Once the old latch is removed, you should be able to insert the new latch into the slot without issues. Make sure the latch is positioned correctly in the slot and is aligned with the screw chambers and then use the new screws to fasten it to the strike plate and door frame.Before you install the new handle, be sure to measure your existing backset (the distance from the center of the big hole on the front surface of the door to the edge). Check that the latch size of the new handle is equal to the measurement.If you’re replacing the latch or handle or handle, or if the old lock cylinder has been damaged, then you will need a new one. If you’re not changing locks the new lock will fit inside the recess you have already installed, and work with your existing keys. Pick a latch that has rectangular cover plates to match your old handles.Remove window handles repairmywindowsanddoors.co.uk can replace your old door handles with a new design of roses and levers to enhance the appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.The first step in replacing the door handle inside is to remove the cover plate or rose, which hides the screws and mechanism inside. Look for a release tab on the plate and make use of a flathead screwdriver to lift it off the knob. It could have a slot on one edge or be secured by a pin.When the cover plate is off take the screw that holds the inside handle in place, and then set it aside. Remove the screws that secure both the inner and outer plates. You can loosen them using a Philips Screwdriver. Then, take the inner plates and latch plate from the door and set them aside.Most doors have an opening between the door jamb and the edge of the frame that allows for a handle, but not all have. If yours does not, you’ll need to make a hole in the door to accommodate the new handle. This is the same procedure for opening a locked door however, you’ll need to be extra careful not to scratch the door or frame.After drilling the holes after which you’ll have to put in new screws for the door knob. Be sure to purchase the same size as the previous ones, to ensure that you do not end up with a handle that’s too tight or loose. Installing a new strike rod and latch is also mandatory. These aren’t included in all door handle sets.Amazon’s Choice FAERSI 2-piece chrome finish handle sets are a fantastic choice if you’re in the market of a high-quality interior door handle replacement set. It’s factory-fitted and has received hundreds of 5-star reviews. It’s a great choice for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.