pintwoman64 – https://www.repairmywindowsanddoors.co.uk/walsall-windowrepair/

How to Replace Door HandlesDoor handles are an essential part of your home’s decor. A new handle can elevate your home and bring your decor to the present.Over time, your knobs on your doors may begin to feel stiff, or break. These are signs that it’s time to replace them. This guide will help you pick the right replacement door handle for your home.Door KnobsDoor handles add to the aesthetics of your house while making it easier for people to open and close doors. They are available in a wide range of finishes, colors and styles that will complement your decor. If yours is beginning show signs of wear or simply require an upgrade, replacing them is relatively simple and can be done in a few steps.You must locate the shaft, or spindle, through which the knob is attached to the door. Some have a tiny hole that you can insert an incredibly small screwdriver to release the set screws holding the knob in place. Some have a thin slot or hole that you can use to press a spring-activated detent pin with flathead. This pin lets go of the latch mechanism and lets you to pull or push the knob.Once you have the spindle, or shaft, in your hand Remove the knob and replace it. Make sure it is aligned correctly and ensure that the latch functions properly before tightening the new set screws.After you’ve replaced the knob, put the latch rod in position over the door’s hole and lock it in place with the rod mechanism on the second knob. Make sure that the holes are aligned, then thread in the screws for the latch plate and tighten them.Some homeowners opt for an brushed or smooth metal finish for their door hardware to give their home a modern and sleek appearance. This will match their other furniture. Others prefer a more rustic design, which pairs well with rustic-styled rooms. If you have family members who are unable to move You may want to consider choosing a rim lock or lever-style door knobs that require less pressure to operate.While aesthetics are traditionally the main consideration when it comes to door handle design, other factors are being taken into consideration too. Infection control and accessibility have been key issues in the creation of new handle designs. For instance, some can be operated with the arm of a person.LatchThe latch that holds your door handle open is prone to wear and tear due to age and use. Changing out the old latch to fit the new handle is a simple DIY job and can make a big change in the way your door opens and closes.Depending on the kind of handle you choose the latch may be a separate piece or an integral part of the knob. In either case, you will follow the same procedure to remove and replace. It’s easy to remove the old latch, especially if you have doors with a “magic” button. This little pressure-slot, located on the side knob is the one you’ll need to press in order to pop the latch out of the handle.If your handle isn’t equipped with this magic button the first step is to take off any cover plates that are positioned over the latch plate. These are usually rectangular or circular and can be removed using a screwdriver to pry them off the handle. Some have a small hole inside that you can slide your screwdriver through, while others snap off.Then, remove the machine screws that attach the inner plate and latch to the door handle. These are the shorter screws with a pointy tip and you’ll be required to keep them in a secure location to reuse them in subsequent steps. Once the screws are removed you can remove the latch plate and mechanism out of the hole in the door and place it in a safe place.Then you can begin to install the new latch. Insert www.repairmywindowsanddoors.co.uk into the door hole and secure it using the hardware supplied. Make sure that the square pin on the inside of the latch is facing the latching mechanism inside the handle and that it lines up with the other screw chambers in the door handle. Then push the exterior latch plate onto the handle and secure it using the screws supplied.Strike PlateOne of the most common reasons for replacing the door handle is that it is loose or isn’t locking properly. This is usually due to malfunctioning components of the latching mechanism, like the strike plate being too small or has moved upwards or downwards on the doorjamb over time. This project lets you replace your old strikeplate with a longer one, which will provide more security for your door and will keep it shut.Apply a lipstick or another marking material on the bolt that you are using to check if it is the strike plate. Close the door and attempt to latch it. If the mark is below the strike plate hole this means that your door isn’t latching because the strike plate is too small. If the mark is above the strike plate hole, it’s likely that the strike plate has been moved up or down the doorjamb.You may be able simply to install the new strikeplate in place over the existing one using the screws included with it, depending on the door. But, you may have to drill holes prior to drilling and then chisel some of the wood to ensure it’s a good fit. If this is the case, be cautious not to chisel too hard or you’ll ruin the strength of your doorjamb.You could also try installing a new strike plate that gives the lock a much more secure grip on the door and requires more force to open it. Typically, it requires two longer screws that anchor the strike plate to the frame of the door. To accomplish this, you’ll need to take off the existing strike plate and then drill and chisel out the wood to create space for the new one.This hard-to-find strike plate is specifically designed to work with antique rim locks and is made of sturdy solid brass in a heavy duty thickness. This kit includes both wood screws and machine screws, so you can choose the right hardware for your requirements. Remember that wood screws have a pointed point, whereas machine screws are blunter.