patiofish09 – https://www.repairmywindowsanddoors.co.uk/chatham-windowrepair/

Tips For Replacing a Window HandleSwitching the handle on your window is an easy project that can be completed in the comfort of your own home. Follow these tips to ensure an elegant and smooth finish.Begin by removing the screw covers to expose the screws within your uPVC window handle. Measure the spindle to make sure you are getting the right size replacement.1. Take a measurement of the Spindle LengthIt’s important that you ensure the correct size of the spindle when replacing a window handle. This is because it will determine how tight or loose the handle is and whether it locks correctly in the frame of the window. The spindle is a metal shaft that connects the handle to the lock on the window frame. The spindle is available in the standard 8mm industry cross-section or older versions that measure 9mm. The current industry standard is 8mm however this was not always the case. When purchasing a new handle, it’s essential to check the measurements.Take the handle off. This can be done easily by turning the handle to the open position, then unwinding two screws that keep the handle in place (which are usually hidden behind plastic caps that will need to removed). After the handle is removed, measure the distance from the base to the end. This will provide you with the measurements required to buy a replacement.There are many options available when it comes time to choose the perfect window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curled mongoose tail latches. The possibilities are endless, but the most important thing is to choose a style that complements your home.Espag handles are usually installed to uPVC windows and are the same size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Window handles made of Cadenza have distinct dimensions due to their angled blade which operates an interlocking mechanism that is multi-point inside the window.Another factor when choosing the best window handle is determining what hand you need to use, which is defined by what hand you use to open the door. upvc door handles espag handles are compatible with either left or right-handed windows. Cranked window handles can only be used on windows that open in one direction.2. Take the handle offA window handle that falls out is a frustrating experience, regardless of regardless of whether the handle has been damaged or worn out. The good news is, you can fix the uPVC handle yourself. All you need is the most basic tools and a bit of time to complete the task.You must first open the window and then ensure that it’s not locked. The next step is to remove the screws that are holding the handle in position. After these have been removed, you are able working on the removal of the handle itself.The handle itself is fixed to a spindle in the window frame. Depending on the type the handle is held in place either by a screw or a pin. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both types of handles are available on casement windows, as well as aluminum ones. They can be locked with a key to prevent unauthorised opening of the window from outside or by locking them by turning the handle clockwise.To take the handle off, you will need to use a screwdriver with a flat blade to remove the clip that holds the handle in place. After this is released, the handle will fall off the spindle. Once the old handle has been removed, you’ll need determine the length of the spindle and make sure that the new handle will fit.Once you have the correct size, you can now fix the new handle into the correct position. It is important to make sure that the new handle is firmly fixed and is turning the correct way (clockwise for open, or counterclockwise for closed). It is also important to check that it has not been fitted upside down.Replace the screw caps. After you have completed this step, you should test the handle to make sure it’s functioning properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and then back.3. Remove the ScrewsA uPVC handle is an important element of any home and is the first thing that shows signs of wear or damage. This could be due to natural factors or through regular use and sometimes even intentional damage caused by criminals who wish to open a locked window to gain access to your home. A simple fix can resolve the issue and prevent it from occurring again.uPVC handles may also be difficult to remove if the locking mechanisms aren’t working properly. Often, the problem is solved by replacing the multipoint lock rather than the entire handle. It’s certainly worth checking this because it could save you money.After you have removed the handle, you’ll have to remove any screws that were holding it in place. They are usually located on the inside face of the base of the handle. It could be necessary to use a screwdriver do this. Be cautious not to over tighten the handle as this could cause it to loosen.Then, you’ll have to find the pins or screws that hold the handle in place. They are typically located on the inside of the base of the handle. You’ll need a screwdriver to remove them. If you wish to replace them, you should replace the caps on the screws and test the handle to ensure it works correctly.Install the handle by aligning the spindle to the cutout in the window mechanism. Then screw it in. Make sure the handle is in an open position and that the screws are secured before replacing the screw covers in the event that you want to do so. You’re done! Now you can enjoy the newly installed window handle. This should help you avoid costly door and window replacements in the near future. If you would like more assistance with this or any other aspect of your uPVC windows, don’t hesitate to contact us.4. Fit the New HandleWhether you’re replacing a broken handle or simply updating it, the process is surprisingly simple and can be completed in just a few steps. The key is to identify the type of handle, measure its spindle, and determine what tools you’ll need to complete the task. Safety is always the primary priority when working with tools and windows. It’s also important to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.The first step is to locate the screws that hold your existing window handle and take them out, while maintaining an appropriate grip on the handle itself to prevent it from falling and causing injury. Once the screws have been removed, you can place them in a safe location to be replaced later.Once the old handle was removed, you can now begin to install the new one. The handle should be a perfect fit for it to function properly and hold the window in its closed position. Then you need to slide the square metal bar on the handle into the window mechanism hole.The final step is to replace the screws caps and test the handle to ensure that it is working. If you’re not happy with the results or if the window does not open and close as it should the next step is to call our experts who can assist you.The majority of UK homes have uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of wear and tear or breakage. Anyone with a bit of DIY knowledge can carry out the process. It is essential that the handle you choose is in line with the style and size of the window. If you’re unsure about what type of handle you require, please contact our team who can provide you with the choices available.