lycrahair52 – https://www.repairmywindowsanddoors.co.uk/southend-windowrepair/

How to Replace Door HandlesDoor handles are a key part of the decor of your home. A new handle can bring your home’s decor up to date.Over time the knobs on your door may become stiff or even break. These are signs it’s time to change them. This guide will help choose the best door handle replacement for your home.Door KnobsThe handles on your doors can enhance the appearance of your house and allow you to open and shut them. They come in a wide range of colors, finishes and styles to complement your decor. If yours is beginning show signs of wear or just need an upgrade replacing them is easy and can be accomplished in a couple of steps.You’ll need to find the shaft, or spindle, through which the knob is attached to the door. Some knobs have a small opening that can be used with an screwdriver to take out the set screws that keep the handle in place. Some have a tiny slot, or hole, that you can press the spring-activated detent pin using a flathead. When you press this pin and the latch mechanism opens, it releases and lets you pull or push the knob.Once you have the spindle or shaft in your hand take the knob off and replace it. Align it correctly and check that the latch functions properly before tightening new set screws.After replacing the knob, put the rod for the latch into the door’s hole. Secure it by securing it to the rod system on the second knob. Make sure the holes are aligned then thread the screws for the latch plate and tighten them.Some prefer a smooth or brushed finish for their door hardware to give it an elegant, modern look that is a perfect match for other furniture in their homes. Some prefer a rustic design that is perfect for farmhouse-style rooms. If you have a member of your family with mobility issues, you may want to choose an rim or lever lock, which requires less pressure to operate.Other aspects are being looked at more and more when it comes to the design of door handles. Accessibility and infection control have been major considerations when it comes to developing new designs for handles. For example some handles handle designs can be operated by a person’s arm.LatchThe latch that holds the door handle open can wear down over time. It is simple to replace the latch on your door handle. This will result in a big difference in how it opens and closes.Depending on the type of knob you have the latch could be a part of the knob itself or it could be an independent piece that is attached to the door. In window handles repairmywindowsanddoors.co.uk , the same process to remove and install will apply. It’s easy to remove the old latch, particularly when you have doors with a “magic” button. The button is located on the left side of the knob, this little pressure-slot is what you have to press to pop the latch right out of the handle and off of the latching mechanism.If your handle doesn’t have this button the first step is to remove any cover plates that rest over the latch plate. These are usually circular or rectangular and can be removed using a screwdriver in order to remove them off of the handle. Some have a small hole in them that you can insert your screwdriver through, while others snap off.The next step is to unscrew the two machine screws that hold the latch and the plate to the door handle. You will need to store these screws with a pointed tip in a safe location so that you can reuse them later. After these screws are removed you can remove the latch plate and mechanism out of the door’s hole and place it in a safe place.Then you can begin to install the new latch. Insert the inside plate of the latch into the hole in the door and secure it using the provided hardware. Make sure the square pin on the inside of the latch is facing the mechanism for latching inside the handle and that it lines up with the other screw chambers of the door handle. Then fix the exterior latch plate with the provided screws.Strike PlateIt is typical to replace a door handle when it feels loose, or isn’t locking properly. This is typically caused by misaligned parts in the latching system, such as a striking plate that’s either too short or has moved upwards or downward on the doorjamb as time passes. This project allows you to replace your old strikeplate with a longer one, which will provide better security for your door and ensure it stays shut.Apply a lipstick or other marking material on the bolt for the latch to determine if it’s the strike plate. Close the door, then try to latch it. If the mark is below your strike plate hole, it means that the plate is too small and the door won’t latch. If the mark is above the strike hole on the plate, it’s likely that the strike plate has been moved up or down the doorjamb.You may be able simply to screw the new strikeplate into place over the old one by using the screws supplied with it, depending on your door. You may have to drill holes first and then chisel a bit of wood to ensure a secure fit. If this is the case Be careful not to chisel out too much wood or you may ruin the integrity of the doorjamb.You can also consider installing a new strike plate that gives the lock a much stronger hold on the door and requires more force to open it. It usually requires two larger screws to anchor the strike plate into the door frame. You’ll have remove the old strike plate, then drill and chisel the wood to make space for the new one.This difficult-to-find strike plate is made of solid brass and comes with a heavy-duty thickness. It’s made to be used on antique rim locks. It comes with machine screws and wood screws, which means you’ll have the correct equipment for your task. Keep in mind that wood screws have a pointed tip while machine screws are more blunt.