gallonpond72 – https://www.repairmywindowsanddoors.co.uk/richmond-windowrepair/

Door Handle ReplacementIt’s worth replacing door handles if you don’t like the way they look or if they’re difficult to use. Installing a new door handle is simple if you have patience.Most modern door handles have cover plates that hide the screws for an attractive appearance. If your new handle doesn’t already have them connected, you’ll have to attach them separately.Remove the handle that was previously usedThe door handle is not only a decoration for your home, but it’s also an element of security that allows you to lock and unlock your door. Over time the door handle could start to lose its grip or feel loose. It might be beginning to appear worn out and old. This is a sign that it’s probably time for a replacement.If your door handle is becoming difficult to use, it may be time to replace it. This is a serious issue since you won’t be capable of locking or unlocking the door, which could put you and your family at risk.Another reason to replace your door handle is when it’s damaged or broken. A damaged or broken door handle can be dangerous, particularly for children and elderly family members who struggle to open it. They could become trapped. Luckily, it’s quite simple to fix a damaged door handle by replacing the handle that was broken.The majority of modern door handles are a standard size and so they are suitable for any door. If you are not certain that your new door handle will work, take off the old one and take measurements of its holes in the housing. This will let you purchase the right size door handle.It is the easiest method to take off the old door handle by taking it off from the door. Usually, a screwdriver is used. However some door handles have an outer cover plate that hides the screws that mount them, so you’ll need to pry off this to access the screws beneath. After removing the handle that was previously used, take note of the way in which the spindle is attached. This will aid in aligning the new handle.You can also remove the door handle by depressing the latch mechanism. You can make use of a screwdriver to take off the door handle. However, you will have to locate the small latch that is located on the edge of the trim piece. After removing the latch, unscrew the handle and the strike plate. Then remove the latch from the edge of the door.Remove the Strike PlateYou’ll have to replace your latch plate when you replace the handle. This is the plate that holds the hole through which the latch of the door hooks when the door is closed. The package the new handles come with will offer two latch plates: a rectangular one and a circular one (see the diagram above detailing the parts of the door handle). If you have a rectangular latch plate, you can replace it with a circular one. This will allow the latch to hook onto the strike plate, making the handle easier.The first step is to remove the screw that’s holding the latch plate that was previously in place. The screws are typically tight and require a fair amount of force to loosen them. It is helpful to get a second person to assist in this area if it is possible.The latch plate should come out of the door after the screws have been removed. If it’s stuck or won’t move, use a small nail file to scratch around the edges of the latch plate. This can sometimes free up the plate.Now you can prepare the new strike plate for installation. Screw the latch plate into the doorjamb using the wood screws that were included with your new handles. Be careful not to tighten too much the screws, as this could cause damage to the strike plate.If you’re not sure whether the latch plate is in the right position Try closing and then opening the door to check if it closes and latches correctly. If not then you’ll have to adjust the strike plate upwards or down, or forward or back until the door shuts and latches correctly.If the door is still moving or jiggling, then you may need to enlarge the hole for latching in the strike plate. This is more common on older doors. It could be caused by wear and tear hinges that aren’t shallow, the incorrect size of the latch or a damaged strike plate. If this is the case you can use a metal file instead of a chisel, or hammer to adjust the strike plate.Removing the LatchThe latch is a bent metal piece that slides in and out of a hole on the inside of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also hooks into an opening in the frame of the door to keep the door shut. If your door shakes when you close it, changing the latch could be all that’s needed to correct the issue.The screws that secure the door latch are difficult to see, but you can usually use a screwdriver to make an insignificant hole on the trim plate and then pry the latch off. After removing the trim plate, you will be able to pull off the latch as well as the bolts that hold it in place and the spindle in position.If the latch doesn’t easily come out you can try using a paper clip or a tool to free it from the handle mechanism. Insert the item into the slot for the latch that is recessed. gently twist or jiggle it until you feel the handle and latch start to split. You may need to repeat this several times before the latch is loose enough to pull out.After the old latch has been removed and the old latch is removed, you should be able to move the new latch into the slot without problems. Use the new screws to connect the latch to the strike plate or door frame. Make window handles that it is correctly placed in the slot and aligned with the screw chambers.Measure the existing backset (the distance between the center of the large hole on the door’s front and the edge) prior to installing the new handle. Also, make sure that the size of the latch on the new handle matches this measurement.You’ll need a new lock cylinder if you’re replacing the latch and handle, or your old one is damaged. If you’re not replacing the locks the new latch will fit in the existing recess and work just fine with your current keys. Pick a latch that has rectangular cover plates that match your old handles.Take off the cover plateDoor handles can start to look worn over time, but if you replace them with a modern lever-on-rose design, it’s a simple and quick DIY project and decorating idea that will enhance the overall appearance of your home. You can purchase complete sets that come with the appropriate escutcheons and privacy adjustor kits.To replace an internal door handle, remove the cover plate (or rose) that covers the screws and inner mechanism. Find a release tab on the plate, and make use of a flathead screwdriver to pop it off the knob. It could have a slot along one edge or be held in place by pins.When the cover plate is off take the screw that holds the inside handle in place and put it aside. It is also necessary to remove the screws that are holding the latch and plates, which you can do by loosening them using a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside.Not all doors have this gap. If yours does not allow for a handle, you’ll have to make a hole through the door. The procedure to do this is the same as opening a door using a lock, but you’ll be taking extra care not to damage the frame or door.The installation of new door knob screws is necessary after holes have been drilled. Make sure to buy the same size as the previous ones, so that you do not end up with a handle that’s too tight or too loose. Installing a new strike rod and latch is also mandatory. They aren’t included in the majority of door handle sets.If you’re looking for a quality replacement set of interior door handles, try the Amazon’s Choice FAERSI two-piece chrome-finished handle set. It’s factory-fitted and has received hundreds five-star reviews. It’s an excellent option for replacing worn out or damaged door hardware on your Chevy.