foxoak1 – https://www.repairmywindowsanddoors.co.uk/hornchurch-windowrepair/

Tips For Replacing a Window HandleSwitching your window handle is an easy project that can be completed in the comfort of your own home. Follow these tips to ensure an elegant and smooth finish.Begin by removing the screws to reveal the screws within your uPVC window handle. Measure the spindle’s length to ensure that you get the correct size replacement.1. Measure the Spindle LengthIt’s important that you have the right size spindle when replacing a window handle. This is because it can determine how tight or loose the handle is, and whether it will lock correctly inside the window frame. The spindle is a metal shaft that connects the handle to the lock on the window frame. The spindle can be found in the standard cross-section of 8mm for industry or the more traditional versions that measure 9mm. The current industry standard is 8mm however this wasn’t always the case so when purchasing a new handle, it’s essential to check the measurements.Take the handle off. This is easily done by turning the handle into the open position, then taking off two screws that secure the handle (which are usually hidden behind plastic caps that will need to removed). Once the handle is removed, take a measurement from the base to the point at which it ends. This will provide you with the measurements needed to purchase a replacement.There are many options to consider when choosing a new window handle from sleek chrome that blends in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing is to select a style that is suitable for your home.Espag handles are typically installed to uPVC windows and are always identical in size, with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Cadenza window handles have an entirely different dimension as they feature an bent blade that is used to operate a multi-point lock mechanism inside the window.When selecting a window handle, you should also consider the hand you use to open your door. Inline window handles aren’t handed and can be used on right or left handed windows. Cranked window handles are handed and are only used on windows that open in one direction.2. Remove the HandleWhether the handle is damaged or worn out the handle of a window that is shattered can be a real pain. The good news is that you can fix the uPVC handle yourself. You will require only some basic hand tools and time to complete the process.First, you must open the window and ensure that it’s in an unlocked position. Then, take off the screw caps that hold the handle in place. After these have been removed, you can begin working on the removal of the handle itself.The handle is attached to a spindle inside the window frame. It is fixed with screws or pins dependent on the kind of handle. The most common handles are the inline Espagnolette and the cockspur handles. Both types of handles are available on casement windows, as well as aluminium ones. The handles can be locked with a key to prevent unauthorised access from the outside. You can also lock the handles by turning them clockwise.To take the handle off, you will require a flat-bladed screwdriver. After the clip has been released, the handle will slide off the spindle. After the handle has been removed, you’ll need take a measurement of the length of the spindle to make sure that the new handle will fit.Once you have the proper size, you can now fix the new handle into the correct position. It is essential to ensure that the handle is properly attached and that it rotates in the proper direction (clockwise when the handle is open, or counterclockwise if the handle is closed). It is also essential to check that it isn’t installed upside down.Replace the cap screws. Once you’ve completed this step, you should test the handle to be sure it is working correctly. Also, you should test the locking mechanism by moving the handle until it is locked position and then back again.3. Remove the ScrewsA uPVC handle is an essential element of any home and is the first thing to show signs of wear or damage. This could be due to natural causes or from frequent use, and sometimes intentional damage caused by criminals who may wish to open a locked window and gain entry to your home. A simple replacement can solve the problem and prevent it from happening again.uPVC handles could also be difficult to remove when the locking mechanisms aren’t working correctly. It’s usually possible to resolve the problem by replacing the multipoint locking mechanism rather than the entire handle. This can save you money.After you’ve removed the old handle, you will need to remove any screws that held it in place. These screws are usually found on the inside of the base of the handle. You may need to use a screwdriver to accomplish this and it’s crucial that you don’t over tighten, as this could cause the handle to become loose.You’ll then have to find the fixing screws or pins that keep the new handle in the correct position. They are typically located on the inside of the handle base. You’ll require a screwdriver to take them off. Once they’re removed you will need to replace the screw caps in the event that you want to do so and test the new handle to make sure it’s working correctly.When you’re ready for installing the new handle, simply align the spindle with the cut out in the window mechanism and screw it in place. Make sure the handle is in the open position and that any screws are securely secured prior to replacing the screw covers should you wish to do this. You’re done! Now you can enjoy the new window handle. This will hopefully help you avoid costly window and door replacements in the near future. Contact us if you require more information about this or any aspect of your uPVC window.4. Install the new handleThe procedure of replacing a damaged window handle or updating it is simple and can be accomplished in only a few simple steps. Identifying the kind of window handle, measuring its spindle length, and knowing the tools you’ll require to complete the task are essential. Safety is always the first priority when working with windows and tools. It’s also important to take your time and follow the steps to ensure that you have a functional handle that is safe to use.The first step is to find the screws that hold your current window handle in place and remove them, while keeping an adequate grip on the handle to prevent it from crashing and result in injury. Once the screws are removed, they can be placed in a safe spot to be replaced in the future.Once the old handle has been removed, you can begin to fit your new one. It is important that the handle fits perfectly to ensure that it is functional and secures the window in place. Next, slide the metal bar that is square on the handle into the hole for the window mechanism.After your new handle is in place, the final thing to do is replace the screw caps and test it to make sure it works. If you’re not satisfied with the results or if the window doesn’t open and close as it should the next step is to call our experts who will be able to assist you.Most UK homes have uPVC Windows. As such, many will need to be changed at some point due to damage or wear. Anyone with some DIY experience can easily carry out the process. The most important factor in the success of the procedure is ensuring that you’re using a replacement handle that is compatible with your window’s size and design. If you’re not sure about the kind of handle you’ll require, don’t hesitate to contact our team who will be able to provide you with the choices available.