churchmallet70 – https://www.thekeylab.co.uk/saab-car-keys/

How to Replace a Saab 9-3 KeyThe Saab 9-3 is a great car that has a lot of driver appeal. It has good visibility and a powerful performance engine. It has a high safety rating.It is nevertheless important to ensure that you have at the very least two working keys for your car. It can be costly to replace a key if you lose it.How to Replace the Ignition Key on a Saab 9-3You’ll need to replace your car keys if it won’t turn. This guide will show you how to replace the ignition key on the Saab 9-3. You will need a replacement key with a reprogrammable battery as well as a new key-fob case.Modern Saab models employ a transponder instead of a traditional key to unlock the car and start it. The problem with this is that the reprogrammable battery inside the key-fob will eventually wear out and lose charge for any longer. This is especially the case if you use the same key on the same lock.The good part is that the battery can be replaced easily by a professional locksmith. If you’ve got the right tools, and a little patience, you can do it yourself. The first step is to disassemble the key-fob from its case. Insert an open-ended head into the slot that is in the middle of your case. The plastic is brittle, and it is susceptible to being damaged.Once the case has been opened, you can make the new key by combining the lower part of old key with the transponder and banana. This will ensure that the new key is mated to the CIM correctly, which can make all the difference when replacing the only key for your Saab 9-3.How do I replace the ignition Key in a Saab 900If you don’t have two keys, you will need remove the dashboard and steering wheel to get to the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, you can remove the dashboard and trim pieces around the steering wheel. After the dashboard has been removed, you can put a screwdriver in the opening behind the ignition switch.The ignition cylinder is equipped with an ignition lock that can stop the car from starting if the key isn’t in it. If the ignition switch on your 900 isn’t working properly, you should check whether the key is in the lock or inside the barrel. You should also rotate your keys and keep them clean to prevent breaking.Saab cars differ from other vehicles because they do not have traditional keys made of metal. Instead, saab key code is able to recognize electronic signals coming from the key fob by using an specialized microchip inside.If you lose only one working key fob, your dealer will charge an extra fee to replace your computer module (also called the CIM). However, we can reprogram your existing computer’s EEPROM and set it to accept new keys without replacing it. You will save over 50% off the dealer’s cost! We call it the SAAB Key PROGRAM. Find out more about it here!How to replace the ignition Key on a Saab 9-5The metal part of classic Saab keys is easy to copy and doesn’t pose a significant threat to theft of vehicles. The real protection comes from the electronic part inside the key-fob. It is equipped with a chip that detects the car when it’s inserted into the ignition switch.Saab’s anti-theft system has been relying on this technology for more than 10 years. It’s not as secure as a physical lock on the door, but it does make the theft of your car much more difficult. Every Saab owner needs to keep an extra Saab key in their vehicle.The majority of new Saabs are delivered with two keys, however they can be added at an agent using a handheld device called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, that have newer, more modern features that require a different key-fob and operate using a different procedure.If you lose all keys, the dealer will replace your CIM or TWICE modules and charge you an additional fee for it. We can reprogram your computer’s EEPROM to accept new keys without replacing expensive modules.How do I replace the ignition Key in the Saab XC90It may be time to replace your SAAB key fob if it’s experiencing issues turning the lock barrel. The procedure is quite simple and you don’t need to visit a dealer. Instead, you can do it yourself at home using only a few tools.You’ll first need to prepare the new keys. Before you begin, disable the anti-theft feature by placing blocks underneath the rear wheels and activating your handbrake. Then, you can put the key in the ignition and turn it to the on position that activates the accessories but does not start the engine. Repeat this procedure 5 times, and then keep the key in the “on” position.The next step is to purchase a new case for the old key fob. They can be found in most auto parts stores and are typically very affordable. You can purchase them without electronics based on the model.To open the case to open the case, gently push the screwdriver with a flathead into the slot in the middle. When you’ve split the case, you will have access to all of the internal electronics. To get rid of the electronics, employ a small screwdriver and try prying them out gently.