cheesecolt1 – https://www.repairmywindowsanddoors.co.uk/northampton-windowrepair/

How to Replace Door HandlesThe door handles in your home are an essential part of the design. A new handle can bring your decor and space modern.Over time, your door knobs may become stiff, or even break. These are indications that it’s time to replace the knobs. This guide will help you pick the right replacement door handle for your home.Door KnobsThe handles on your doors will improve the appearance of your house and make it easier to shut and open them. They are available in a wide variety of finishes, colors, and styles to complement your decor. If yours is beginning to show signs of wear or requires an upgrade it is possible to change them in just a few simple steps.The first thing to do is locate the spindle or shaft through the knob’s attachment to the door. Some have a tiny hole that you can put a narrow screwdriver into to loosen the set screws holding the handle in place. Some have a slot or hole that can be used with a flathead screwdriver to press on a spring-activated pin called a detent. The pin opens the latch mechanism and allows you pull or push the knob.Once you have the spindle or shaft, in your hand Remove the knob and replace it. Align it correctly and check that the latch functions properly before tightening the new set screws.Once you’ve replaced the knob, put the latch rod in position over the door’s hole and lock it in place with the rod mechanism on the second knob. Make sure that the holes are aligned then tighten the screws on the latch plate.Some homeowners opt for a smooth or brushed metal finish for their door hardware, giving their home a sleek and contemporary look. This will match their furniture. Others prefer a more rustic design that is a good match for farmhouse-styled spaces. If you have family members with mobility limitations You might be interested in a rim lock or lever-style door knobs, which require less pressure to operate.While aesthetics are traditionally the main consideration when it comes to door handle design, other factors are increasingly being considered as well. Accessibility and control of infections are key considerations when it comes to developing new designs for handles. For instance some handles handle designs can be operated by the arm of a person.LatchThe latch that keeps your door handle open will wear out due to age and use. It is simple to change the latch on your door handle. This will make a big difference in how it opens and closes.Depending on the type of handle you use the latch may be a separate piece or an integral part of the knob. In either scenario, the same procedure to remove and install will be used. It’s simple to take off the old latch, especially if you have an entry handle that has a “magic” button. Located on the side of the knob, this little pressure-slot is what you have to press to take the latch right out of the handle and out of the latching mechanism.If your handle doesn’t have this magic button you’ll need to remove the cover plates placed over the latch plate. These are usually rectangular or circular and can be removed by using a screwdriver to pull them off of the handle. Some have a slot in which you can put your screwdriver. Other handles simply snap off.Then, unscrew upvc replacement door handles that attach the inner plate and latch to the door handle. It is important to keep these shorter screws with a pointed tip in a safe place so that you can reuse them later. Once these are off you can pull the latch plate and mechanism out of the door’s hole and put it away.You can now begin installing the new latch. Install the inside plate of the latch into the hole in the door and secure it using the hardware supplied. Make sure that the square pin on the inside of the latch is pointing towards the latching mechanism inside the handle, and that it lines up with the other screw chambers of the door handle. Then, secure the exterior latch plate with the provided screws.Strike PlateIt is not uncommon to replace a door handle when it is loose or doesn’t lock properly. This is typically caused by malfunctioning parts of the latching system, such as a striking plate that’s either too small or has moved up or down on the doorjamb over time. This easy project allows you to replace your existing strike plate with a new, longer one that will give you better security and will keep your door shut.Apply some lipstick or other marking material on the latch bolt to determine if it’s the strike plate. Close the door and attempt to latch it. If the mark is below the strike plate’s hole, this means that your door isn’t latching because the strike plate is too small. If the mark is above or below the strikeplate hole the strikeplate is likely to have been moved upwards or downwards on the doorjamb.It is possible to install the new strikeplate in place over the existing one by using the screws supplied with it, based on your door. You may have to first drill holes and then chisel the wood to ensure a perfect fit. If this is the case, you must be careful not to chisel too hard or you’ll damage the integrity of your doorjamb.Installing a new box-style strike plate will give the lock a stronger hold on the doors and will require more force to open the doors. It usually requires two larger screws to fix the strike plate into the door frame. It is necessary remove the old strike plate and then drill and chisel the wood to make room for the new one.This difficult-to-find strike plate was made to work with rim locks from the past, and is made of robust solid brass with a heavy duty thickness. It comes with machine screws and wood screws, which means you’ll have the correct hardware for your job. Keep in mind that wood screws have a pointed tip whereas machine screws are blunter.