basscandle3 – https://www.repairmywindowsanddoors.co.uk/stokenewington-windowrepair/

Door Handle ReplacementDoor handles seem like something minor, but if you dislike the appearance of the handles or are finding them difficult to use then it’s time to replace them. Installing the new handle on your door is simple if you have patience.Modern door handles are usually equipped with cover plates that hide the screws, giving them an attractive appearance. If your new handle does not have screws already connected, you’ll need to attach them separately.Remove the Old HandleThe door handle is not only a decorative addition to your home It’s also a safety feature that allows you to lock and unlock the door. However, as time passes the door handle could lose its grip, become loose or start to look old and worn out. This is a clear indication that it’s time to replace the door handle.One of the first indications that your door handle is in need of replacing is when it becomes difficult to operate. This is a problem since it means you can not lock or unlock your door, which could be a security risk for you and your family.Another reason to replace your door handle is when it’s damaged or broken. A damaged or broken door handle is risky, particularly for elderly and children members who might struggle to open it. They could be trapped. Luckily, it’s quite simple to fix a damaged door handle by replacing the old one.Modern door handles are usually standard sizes and will fit any door. If you’re not certain if your new door handle will work, take off the old one and measure its housing holes. This will allow you to purchase the correct size door handle.It is the easiest method to remove the door handle by unscrewing it from the door. This is usually done with a screw driver. However some door handles have an outer cover plate that hides the mounting screws so you’ll need to remove this cover plate to get access to the screws underneath. After you have removed the handle that was previously used, take note of how the spindle is connected. This will help you align the new handle.Alternately, you can take off the door handle by removing it from the latch mechanism. This is usually done using a screwdriver but you’ll need to find the small latch, which should be at the edge of the trim piece. After you have removed the latch, you can remove the handle from the strike plate and then remove the latch from the door edge.Removing the Strike PlateIf you are replacing your handle, you’ll also need to replace the latch plate, which is the hole which the door’s latch hooks into when it closes. The new handles will come with two latch plates which are a circular and a rectangular plate (see the above diagram that shows the parts of a door handle). If your current latch plate is rectangular, swap it out for the circular one so that the latch hooks into the strike plate in a way that makes the handle more comfortable to use.The first step is to take off the screw that is holding the old latch plate. These screws can be quite tight, and may require some force to loosen. If possible, it may be helpful to have another person assist with this part.After the screws have been removed the latch should slide out of the door easily. If it’s stuck or won’t move, use a small nail file to scrape around the edges of the latch plate. This may help free the plate.Now you can prepare the new strike plate to be installed. Attach the latch plate to the door jamb using the screws that were included with the new handles. Do not tighten the screws too much as this could damage the strike plate.If you’re unsure whether the latch plate is in the right position, try closing and opening the door to see whether it locks and closes correctly. If it does not then you’ll need to adjust the strikeplate upwards or down or forward or back until the door locks correctly.If the door is moving or jiggling, you may need to enlarge the hole for latching in the strike plate. This is more prevalent on older doors. It can be caused by wear and tear hinges that are too small, a wrong size latch or a damaged strike plate. If this is the case, follow the exact procedure as adjusting the strike plate, but with the use of a metal file instead the hammer and chisel.Removing the LatchThe latch is the angled piece of metal that is able to move between the hole that runs along the inside edge of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also hooks into an opening in the door frame to ensure that the door stays closed. If your door wiggles when you close it, replacing the latch might be all you need to fix it.The screws that hold the door latch are difficult to locate however, you can insert a screwdriver into a small hole in the trim plate and pry the latch off. After you’ve removed the trim plate, it will be simple to take off the latch and the bolts that keep the spindle and latch in the position.If the latch is not easily removed using a paperclip or tool to remove it from the handle mechanism. Insert the item in the recessed latch slot and gently twist it or jiggle until you feel the that the latch and handle are beginning to break off. You may have to repeat this process several times before you can remove the latch.You should be able slide the new latch into its slot without issues once you have removed the old one. Make use of the new screws to secure the latch to the strike plate or door frame. Make sure it’s properly positioned in the slot, and aligned with the screw chambers.Before you install the new handle, be sure to measure your existing backset (the distance from the center of the big hole on the front surface of the door to the edge). You should also check whether the size of the latch on the new handle matches the measurement of your existing handle.If you are replacing the latch or handle or handle, or if the old lock cylinder is damaged, then you’ll need an entirely new one. If you’re not switching locks, a new lock should fit into your existing recess, and work with your current keys. Select a latch with rectangular cover plates that match your existing handles.Then remove the Cover PlateYou can replace your old door handles with a new rose and lever designs to make a difference in the appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.To replace the door handle inside remove the cover plate (or rose) that protects the screws and the inner mechanism. Use a flathead for removing the cover plate. It could have an opening along one side or be secured by pins.Remove the screw that is holding the handle in the interior and put it aside after the cover plate has been removed. Remove the screws that hold both the inner and outer plates. You can loosen them by using a Philips Screwdriver. Then, remove the inner plates and latch plate from the door and set them aside.Not all doors have this gap. If yours doesn’t then you’ll have to drill a hole into the door for the new handle. It’s the same procedure as opening a door locked however you’ll need to be extra careful not to damage the door or frame.Installing new screws for the door knob is necessary after the holes have been drilled. Make sure you purchase the same size as the old ones, so that you won’t have a handle that’s too tight or loose. It’s also necessary to install an additional strike rod and latch plate that aren’t part of the majority of door handle sets.If you’re in search of a reliable replacement set of interior door handles look no further than the Amazon’s Choice FAERSI two-piece chrome finish handle set. It’s a factory-fit and has received a plethora of five-star reviews from delighted customers. It’s an excellent choice to replace damaged or worn interior door handle hardware on your Chevy HHR.